Tips - Teromas Inflator

TEROMAS Inflator Compressor Quick Instructions

The TEROMAS Inflator Compressor is used to inflate tires etc with air. It can run off AC or DC, i.e., you can plug it into a wall outlet or a 12V car cigarette lighter. Both cables are in the cloth bag holding the compressor.

The default tip fits a standard Schrader valve. It comes with 3 additional adaptors and a spare fuse. (These can be found in the "spare things" box in the hot tub house - labeled with a 4.)

Follow these steps:

• Choose either the AC (wall outlet) or DC (auto cigarette lighter) cable. (Both are at the bottom of the case.)
• Plug the chosen cable into the inflator unit. (The AC cable goes into the oval receptacle; the DC cable goes into the rectangle receptacle.)
• Plug the other end of the cable into the wall outlet or the cigarette lighter.
• Unwind the air hose from the back of the inflator unit.
• Connect the air hose to the valve.
• If the display does not say "PSI", press the "R" button until PSI shows
• Press the + or - button until the desired pressure is displayed
• Wait for the display to stop blinking.
• Press the start button.
  
  
• Inflation should start. The inflator unit will automatically turn off once it reaches the set pressure.
• Disconnect the air hose and put everything away.